Release SyncVito 1.0.10

CHANGELOG.md

@@ -1,5 +1,66 @@
 # Änderungsprotokoll
 
+## 1.0.10 – 2026-09-27
+
+### Neu
+
+- **Etappen- und Bereichsanzeige:** Beim Synchronisieren wird der aktuelle Hauptordner (z. B. AppData, Dokumente oder definierte Unterauswahlen) zusammen mit der aktuellen Etappe (z. B. `[2/4 AppData]`) im Fortschrittsdock angezeigt, sodass stets ersichtlich ist, in welchem Bereich SyncVito gerade arbeitet und wie viele Ordner noch ausstehen.
+- **Live-Status in der Aufgabenliste:** Die Aufgaben-Tabelle zeigt laufende Vorgänge live mit aktuellem Prozentsatz (z. B. `🔄 Läuft (45 %)`), wartende Aufgaben mit ihrer Listenposition (`⏳ In Warteschlange (#2)`) sowie pausierte Aufgaben an.
+- **Pause- und Fortsetzen-Funktion:** Synchronisationsläufe können jederzeit über Buttons im Header, im Progress-Dock sowie im Tray-Menü pausiert und fortgesetzt werden.
+- **Nahtlose Wiederaufnahme nach Neustart:** Der Pausenzustand und die verbleibende Aufgaben-Warteschlange werden dauerhaft gesichert. Nach einem Neustart des Tools oder des Rechners setzt SyncVito genau an der unterbrochenen Stelle fort; bereits kopierte Dateien werden anhand ihrer Signatur sofort übersprungen.
+
+## 1.0.9 – 2026-09-24
+
+### Behoben
+
+- Beim Start einer Synchronisation wird die Fortschrittsanzeige sofort zurückgesetzt. Bereits beim Einlesen von Quelle und Ziel erscheinen der aktuelle Ordner und die Anzahl gefundener Dateien; eine vorherige Updateanzeige bleibt nicht mehr unverändert stehen.
+- Der Gesamtstatus kennzeichnet einen laufenden Vorgang eindeutig mit „Synchronisierung läuft“.
+- Windows-Verzeichnisverknüpfungen (Junctions) werden beim Einlesen übersprungen, damit insbesondere AppData nicht mehrfach oder zyklisch durchsucht wird.
+- Bei einer Unterauswahl werden nicht ausgewählte Verzeichniszweige nicht mehr vollständig durchsucht.
+
+## 1.0.8 – 2026-09-24
+
+### Behoben
+
+- Der Updatewächter wartet zusätzlich zu den auslösenden PyInstaller-Prozessen auf weitere Instanzen derselben installierten Anwendung. Solange diese noch laufen, wird der Installer nicht gestartet.
+- Das tatsächliche Ende des Installers und sein Exitcode werden zuverlässig erfasst. Der Wächter wartet dabei nicht auf die anschließend neu gestartete Anwendung.
+- Abgebrochene Installationen und weiterhin laufende Instanzen werden protokolliert und beim nächsten Programmstart mit der tatsächlich gestarteten Version angezeigt.
+- Installations- und Protokollpfade mit Leerzeichen oder Apostrophen werden beim Aufruf des Installers korrekt übergeben.
+
+## 1.0.7 – 2026-09-24
+
+### Behoben
+
+- Bei gesperrten Dateien, etwa in AppData, zeigt SyncVito eine kompakte Zusammenfassung und kennzeichnet die Sicherung als unvollständig. Vollständige Dateipfade und bekannte Sperrprozesse erscheinen im Protokoll.
+- Fehlende Zugriffsrechte werden von tatsächlichen Dateisperren unterschieden; zusätzliche Fehler bleiben auch bei teilweise blockierten Sicherungen sichtbar.
+- Die Sperrerkennung berücksichtigt die tatsächlich betroffene Quell- oder Zieldatei und verarbeitet Windows-Dateihandles und Fehlercodes korrekt.
+- Automatische Wiederholungsversuche starten bereits nach Freigabe einzelner Dateien und berücksichtigen alle bereitstehenden Aufgaben.
+- Während eines erneuten Synchronisationslaufs bleibt dessen Aktivität im Gesamtstatus sichtbar.
+
+## 1.0.6 – 2026-09-24
+
+### Behoben
+
+- Dateianzeige und Fortschrittsleiste besitzen nun feste Breiten und verschieben sich beim Wechsel zwischen unterschiedlich langen Dateipfaden nicht mehr.
+- Lange Dateipfade werden platzsparend gekürzt; der vollständige Text bleibt als Tooltip verfügbar.
+
+## 1.0.5 – 2026-09-24
+
+### Neu
+
+- SyncVito prüft bei jedem Programmstart und während des Betriebs alle 30 Minuten automatisch auf Updates.
+- Verfügbare Updates werden zusätzlich zum Hinweisfenster mit einer auffälligen „UPDATE“-Kennzeichnung am Eintrag „Einstellungen“ angezeigt.
+
+### Behoben
+
+- Wird eine automatische Prüfung durch eine laufende Synchronisation oder Updateaktion verhindert, wird sie nach einer Minute erneut versucht.
+
+## 1.0.3 – 2026-09-24
+
+### Behoben
+
+- Der automatische Neustart nach einem internen Update setzt nun die geerbte PyInstaller-Laufzeitumgebung zurück und verhindert dadurch den Sicherheitsfehler beim Start der aktualisierten Anwendung.
+
 ## 1.0.2 – 2026-09-24
 
 ### Behoben

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "syncvito"
-version = "1.0.2"
+version = "1.0.10"
 description = "Windows-Desktopwerkzeug für lokale und NAS-Synchronisation"
 readme = "README.md"
 requires-python = ">=3.11"

src/syncvito/coordinator.py

@@ -2,8 +2,10 @@
 
 from __future__ import annotations
 
+import threading
 import traceback
 from collections import deque
+from contextlib import suppress
 from datetime import datetime, timedelta
 from pathlib import Path
 
@@ -25,12 +27,12 @@ def derive_overall_status(
     if TaskRuntimeState.ERROR in states:
         return "error", "Fehler"
     if TaskRuntimeState.WAITING_FOR_RELEASE in states:
-        return "error", "Wartet auf Dateifreigabe"
+        return "error", "Synchronisierung läuft" if running else "Unvollständig – Dateien gesperrt"
     if globally_paused:
         return "paused", "Pausiert"
     if TaskRuntimeState.ACTIVE not in states:
         return "paused", "Inaktiv"
-    return "active", "Synchronisiert" if running else "Bereit"
+    return "active", "Synchronisierung läuft" if running else "Bereit"
 
 
 class _WorkerSignals(QObject):
@@ -40,15 +42,17 @@ class _WorkerSignals(QObject):
 
 
 class _SyncWorker(QRunnable):
-    def __init__(self, task: SyncTask, engine: SyncEngine) -> None:
+    def __init__(self, task: SyncTask, engine: SyncEngine, pause_event: threading.Event | None = None) -> None:
         super().__init__()
         self.task = task
         self.engine = engine
+        self.pause_event = pause_event
         self.signals = _WorkerSignals()
 
     def run(self) -> None:
         try:
-            result = self.engine.synchronize(self.task, self.signals.progress.emit)
+            cancel_check = self.pause_event.is_set if self.pause_event else None
+            result = self.engine.synchronize(self.task, self.signals.progress.emit, cancel_check=cancel_check)
         except UnavailablePathError as exc:
             self.signals.failed.emit(self.task.id, str(exc), True)
         except Exception as exc:  # noqa: BLE001 - Worker-Grenze muss UI-Absturz verhindern.
@@ -79,6 +83,8 @@ class SyncCoordinator(QObject):
         self.engine = SyncEngine()
         self.pool = QThreadPool.globalInstance()
         self.pool.setMaxThreadCount(max(2, self.pool.maxThreadCount()))
+        self._pause_event = threading.Event()
+        self._paused_task_id: str | None = None
         self._queue: deque[str] = deque()
         self._running_task_id: str | None = None
         self._retry_tasks: dict[str, list[Path]] = {}
@@ -91,6 +97,13 @@ class SyncCoordinator(QObject):
         self._bridge.changed.connect(self._on_realtime_event)
         self.monitor = RealtimeMonitor(self._bridge.changed.emit)
 
+        if self.config.settings.pending_queue:
+            for task_id in self.config.settings.pending_queue:
+                if any(t.id == task_id and t.enabled for t in self.config.tasks) and task_id not in self._queue:
+                    self._queue.append(task_id)
+            if self.config.settings.paused and self._queue:
+                self._paused_task_id = self._queue[0]
+
         self._schedule_timer = QTimer(self)
         self._schedule_timer.setInterval(30_000)
         self._schedule_timer.timeout.connect(self._check_intervals)
@@ -101,6 +114,21 @@ class SyncCoordinator(QObject):
         self._retry_timer.start()
         self.rebuild_monitors()
 
+    @property
+    def running_task_id(self) -> str | None:
+        """ID der aktuell ausgeführten Aufgabe."""
+        return self._running_task_id
+
+    @property
+    def queued_task_ids(self) -> list[str]:
+        """IDs aller Aufgaben in der aktuellen Warteschlange."""
+        return list(self._queue)
+
+    @property
+    def paused_task_id(self) -> str | None:
+        """ID der zuletzt unterbrochenen Aufgabe."""
+        return self._paused_task_id
+
     def task_state(self, task_id: str) -> TaskRuntimeState:
         """Liefert den aktuellen Engine-Zustand einer Aufgabe."""
         return self._task_states.get(task_id, TaskRuntimeState.PAUSED)
@@ -135,16 +163,33 @@ class SyncCoordinator(QObject):
         """Zeigt an, ob momentan ein Worker aktiv ist."""
         return self._running_task_id is not None
 
+    def _save_pending_queue(self) -> None:
+        pending: list[str] = []
+        if self._running_task_id is not None:
+            pending.append(self._running_task_id)
+        for tid in self._queue:
+            if tid not in pending:
+                pending.append(tid)
+        self.config.settings.pending_queue = pending
+        with suppress(Exception):
+            self.config_store.save(self.config)
+
     def enqueue(self, task_id: str) -> None:
         """Stellt eine Aufgabe dedupliziert in die serielle Warteschlange."""
-        if self.config.settings.paused:
-            self.log_created.emit("Synchronisation", "Hinweis", "SyncVito ist pausiert.")
-            return
         task = self._task(task_id)
         if task is None or not task.enabled:
             return
+        if self.config.settings.paused:
             if task_id != self._running_task_id and task_id not in self._queue:
                 self._queue.append(task_id)
+                self._save_pending_queue()
+                self._set_task_state(task_id, TaskRuntimeState.PAUSED)
+            self.log_created.emit("Synchronisation", "Hinweis", "SyncVito ist pausiert. Aufgabe eingereiht.")
+            return
+        if task_id != self._running_task_id and task_id not in self._queue:
+            self._queue.append(task_id)
+            self._save_pending_queue()
+            self._set_task_state(task_id, TaskRuntimeState.ACTIVE)
         self._start_next()
 
     def enqueue_all(self) -> None:
@@ -156,13 +201,23 @@ class SyncCoordinator(QObject):
     def set_paused(self, paused: bool) -> None:
         """Ändert den globalen Pausenzustand."""
         self.config.settings.paused = paused
-        self.config_store.save(self.config)
         if paused:
-            self.log_created.emit("Status", "Hinweis", "Alle automatischen Auslöser sind pausiert.")
+            self._pause_event.set()
+            self._save_pending_queue()
+            self.log_created.emit("Status", "Hinweis", "Synchronisation pausiert.")
         else:
+            self._pause_event.clear()
+            self._paused_task_id = None
             self.log_created.emit("Status", "Erfolg", "Synchronisation fortgesetzt.")
+            if not self._queue and self.config.settings.pending_queue:
+                for tid in self.config.settings.pending_queue:
+                    if tid not in self._queue and any(t.id == tid and t.enabled for t in self.config.tasks):
+                        self._queue.append(tid)
             self._start_next()
+        with suppress(Exception):
+            self.config_store.save(self.config)
         self._emit_overall_status()
+        self.refresh_task_states()
 
     def rebuild_monitors(self) -> None:
         """Aktualisiert alle Dateisystemüberwachungen."""
@@ -176,6 +231,14 @@ class SyncCoordinator(QObject):
     def stop(self) -> None:
         """Stoppt die Dateisystemüberwachung beim Beenden."""
         self.monitor.stop()
+        if self._running_task_id is not None:
+            self._pause_event.set()
+            self._save_pending_queue()
+            self.config.settings.paused = True
+            with suppress(Exception):
+                self.config_store.save(self.config)
+            if hasattr(self.pool, "waitForDone"):
+                self.pool.waitForDone(1500)
 
     def _start_next(self) -> None:
         if self._running_task_id is not None or self.config.settings.paused or not self._queue:
@@ -186,10 +249,14 @@ class SyncCoordinator(QObject):
             self._start_next()
             return
         self._running_task_id = task_id
+        self._paused_task_id = None
+        self._save_pending_queue()
+        self.progress_changed.emit(0, f"{task.name}: Synchronisation wird gestartet …")
         self.idle_changed.emit(False)
         self._emit_overall_status()
         self.log_created.emit(task.name, "Start", "Synchronisation gestartet.")
-        worker = _SyncWorker(task, self.engine)
+        self._pause_event.clear()
+        worker = _SyncWorker(task, self.engine, self._pause_event)
         worker.signals.progress.connect(self.progress_changed)
         worker.signals.finished.connect(self._on_finished)
         worker.signals.failed.connect(self._on_failed)
@@ -200,30 +267,54 @@ class SyncCoordinator(QObject):
         if task is None:
             self._complete_current()
             return
+
+        if result.paused:
+            self._paused_task_id = task_id
+            if task_id not in self._queue:
+                self._queue.appendleft(task_id)
+            self._save_pending_queue()
+            self._set_task_state(task_id, TaskRuntimeState.PAUSED)
+            self.log_created.emit(task.name, "Pausiert", f"Synchronisation bei {result.copied} Dateien angehalten.")
+            self._running_task_id = None
+            self.progress_changed.emit(0, f"{task.name}: Pausiert – zum Fortsetzen klicken")
+            self.idle_changed.emit(True)
+            self._emit_overall_status()
+            return
+
         task.last_run = datetime.now().isoformat(timespec="seconds")
+        if task_id in self.config.settings.pending_queue:
+            self.config.settings.pending_queue.remove(task_id)
+        with suppress(Exception):
             self.config_store.save(self.config)
+
         if result.blocked:
             paths = [blocked.path for blocked in result.blocked]
             self._retry_tasks[task_id] = paths
-            descriptions: list[str] = []
-            for blocked in result.blocked:
-                names = ", ".join(f"{process.name} (PID {process.pid})" for process in blocked.processes)
-                descriptions.append(f"{blocked.path.name}: {names or 'sperrender Prozess nicht ermittelbar'}")
-            message = "Zurückgestellt – " + "; ".join(descriptions)
+            message = (
+                f"{result.copied} kopiert, {len(result.blocked)} Dateien gesperrt – Sicherung unvollständig. "
+                "Andere Dateien wurden weiterverarbeitet. Automatischer Wiederholungsversuch nach Freigabe; "
+                "ggf. betroffene Programme schließen. Details im Protokoll."
+            )
             self._lock_messages[task_id] = message
             self._emit_lock_summary()
             self.log_created.emit(task.name, "Blockiert", message)
+            for blocked in result.blocked:
+                names = ", ".join(f"{process.name} (PID {process.pid})" for process in blocked.processes)
+                self.log_created.emit(
+                    task.name, "Blockiert", f"{blocked.path}: {names or 'sperrender Prozess nicht ermittelbar'}"
+                )
             self._set_task_state(task_id, TaskRuntimeState.WAITING_FOR_RELEASE)
-        elif result.errors:
-            self._retry_tasks[task_id] = []
-            self._lock_messages.pop(task_id, None)
-            self._emit_lock_summary()
-            self.log_created.emit(task.name, "Fehler", " | ".join(result.errors[:5]))
-            self._set_task_state(task_id, TaskRuntimeState.ERROR)
         else:
-            self._retry_tasks.pop(task_id, None)
             self._lock_messages.pop(task_id, None)
             self._emit_lock_summary()
+        if result.errors:
+            # Auch zusätzliche Fehler eines teilweise blockierten Laufs sichtbar halten.
+            self._retry_tasks[task_id] = []
+            for error in result.errors:
+                self.log_created.emit(task.name, "Fehler", error)
+            self._set_task_state(task_id, TaskRuntimeState.ERROR)
+        elif not result.blocked:
+            self._retry_tasks.pop(task_id, None)
             summary = f"{result.copied} kopiert, {result.deleted} gelöscht, {result.conflicts} Konfliktkopien"
             self.log_created.emit(task.name, "Erfolg", summary)
             self._set_task_state(task_id, TaskRuntimeState.ACTIVE)
@@ -244,6 +335,9 @@ class SyncCoordinator(QObject):
         self.progress_changed.emit(100, "Abgeschlossen")
         if not self._queue:
             self.idle_changed.emit(True)
+            self.config.settings.pending_queue = []
+            with suppress(Exception):
+                self.config_store.save(self.config)
         self._emit_overall_status()
         QTimer.singleShot(200, self._start_next)
 
@@ -273,13 +367,12 @@ class SyncCoordinator(QObject):
         if self.config.settings.paused or self.is_running:
             return
         for task_id, paths in list(self._retry_tasks.items()):
-            if paths and any(is_file_locked(path) for path in paths):
+            if paths and all(is_file_locked(path) for path in paths):
                 continue
             self.log_created.emit(
                 "Automatischer Versuch", "Hinweis", "Blockierte oder nicht erreichbare Datei wird erneut geprüft."
             )
             self.enqueue(task_id)
-            break
 
     def _task(self, task_id: str) -> SyncTask | None:
         return next((task for task in self.config.tasks if task.id == task_id), None)
@@ -296,4 +389,8 @@ class SyncCoordinator(QObject):
         self.overall_status_changed.emit(status, text)
 
     def _emit_lock_summary(self) -> None:
-        self.lock_changed.emit("\n".join(self._lock_messages.values()))
+        messages = list(self._lock_messages.values())
+        summary = "\n".join(messages[:2])
+        if len(messages) > 2:
+            summary += f"\nWeitere {len(messages) - 2} Aufgaben mit gesperrten Dateien. Details im Protokoll."
+        self.lock_changed.emit(summary)

src/syncvito/file_locks.py

@@ -23,7 +23,22 @@ def is_file_locked(path: Path) -> bool:
     """Prüft eine vorhandene Datei durch exklusives Öffnen ohne Schreibzugriff."""
     if not path.exists() or os.name != "nt":
         return False
-    handle = ctypes.windll.kernel32.CreateFileW(
+    kernel32 = ctypes.WinDLL("kernel32", use_last_error=True)
+    create_file = kernel32.CreateFileW
+    create_file.argtypes = [
+        wintypes.LPCWSTR,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        ctypes.c_void_p,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        wintypes.HANDLE,
+    ]
+    create_file.restype = wintypes.HANDLE
+    close_handle = kernel32.CloseHandle
+    close_handle.argtypes = [wintypes.HANDLE]
+    close_handle.restype = wintypes.BOOL
+    handle = create_file(
         str(path),
         0x80000000,
         0,
@@ -34,8 +49,8 @@ def is_file_locked(path: Path) -> bool:
     )
     invalid_handle = ctypes.c_void_p(-1).value
     if handle == invalid_handle:
-        return ctypes.get_last_error() in {5, 32, 33}
-    ctypes.windll.kernel32.CloseHandle(handle)
+        return ctypes.get_last_error() in {32, 33}
+    close_handle(handle)
     return False
 
 

src/syncvito/main_window.py

@@ -3,11 +3,11 @@
 from __future__ import annotations
 
 import sys
-from datetime import datetime, timedelta
+from datetime import datetime
 from pathlib import Path
 
 from PyQt6.QtCore import QEvent, Qt, QTimer, pyqtSignal
-from PyQt6.QtGui import QAction, QCloseEvent, QFontDatabase
+from PyQt6.QtGui import QAction, QCloseEvent, QFontDatabase, QResizeEvent
 from PyQt6.QtWidgets import (
     QAbstractItemView,
     QApplication,
@@ -48,6 +48,38 @@ from syncvito.version import __version__
 
 __all__ = ["MainWindow"]
 
+UPDATE_CHECK_INTERVAL_MS = 30 * 60 * 1000
+UPDATE_RETRY_INTERVAL_MS = 60 * 1000
+PROGRESS_TEXT_WIDTH = 300
+PROGRESS_BAR_WIDTH = 450
+
+
+class _ElidedLabel(QLabel):
+    """Hält dynamische Texte in einer festen Breite vollständig zugänglich."""
+
+    def __init__(self, text: str = "", parent: QWidget | None = None) -> None:
+        super().__init__(parent)
+        self._full_text = ""
+        self.setText(text)
+
+    def setText(self, text: str) -> None:  # noqa: N802 - Qt API
+        self._full_text = text
+        self.setToolTip(text)
+        self.setAccessibleName(text)
+        self._refresh_elided_text()
+
+    def resizeEvent(self, event: QResizeEvent) -> None:  # noqa: N802 - Qt API
+        super().resizeEvent(event)
+        self._refresh_elided_text()
+
+    def _refresh_elided_text(self) -> None:
+        visible_text = self.fontMetrics().elidedText(
+            self._full_text,
+            Qt.TextElideMode.ElideMiddle,
+            max(0, self.contentsRect().width()),
+        )
+        super().setText(visible_text)
+
 
 class MainWindow(QMainWindow):
     """Zentrale SyncVito-Benutzeroberfläche."""
@@ -59,9 +91,10 @@ class MainWindow(QMainWindow):
         self.config = config
         self.config_store = config_store
         self._allow_close = False
+        self._notified_update_version: str | None = None
         self.setWindowTitle("SyncVito")
         self.setWindowIcon(app_icon())
-        self.setMinimumSize(980, 680)
+        self.setMinimumSize(1040, 680)
         self.resize(1220, 800)
 
         self.coordinator = SyncCoordinator(config, config_store, self)
@@ -71,7 +104,17 @@ class MainWindow(QMainWindow):
         self._connect_coordinator()
         self._refresh_tasks()
         self._set_global_status(*self.coordinator.current_overall_status())
+
+        self.update_check_timer = QTimer(self)
+        self.update_check_timer.setInterval(UPDATE_CHECK_INTERVAL_MS)
+        self.update_check_timer.timeout.connect(self._automatic_update_check)
+        self.update_check_timer.start()
+        self.update_retry_timer = QTimer(self)
+        self.update_retry_timer.setSingleShot(True)
+        self.update_retry_timer.setInterval(UPDATE_RETRY_INTERVAL_MS)
+        self.update_retry_timer.timeout.connect(self._automatic_update_check)
         QTimer.singleShot(3000, self._automatic_update_check)
+        QTimer.singleShot(1000, self._show_previous_update_error)
         cleanup_attempts = 6 if "--updated" in sys.argv else 1
         QTimer.singleShot(3000, lambda: self._cleanup_update_installers(cleanup_attempts))
         if "--updated" in sys.argv:
@@ -159,6 +202,7 @@ class MainWindow(QMainWindow):
             layout.addWidget(button)
             self.nav_buttons.append(button)
         self.nav_buttons[0].setChecked(True)
+        self.settings_nav_button = self.nav_buttons[2]
         layout.addStretch(1)
 
         version = QLabel(f"Version {__version__}\nby Davito")
@@ -191,6 +235,9 @@ class MainWindow(QMainWindow):
         self.sync_all_button.setProperty("primary", True)
         self.sync_all_button.clicked.connect(self.coordinator.enqueue_all)
         layout.addWidget(self.sync_all_button, 0, Qt.AlignmentFlag.AlignVCenter)
+        self.header_pause_button = QPushButton("Pausieren")
+        self.header_pause_button.clicked.connect(self._toggle_pause)
+        layout.addWidget(self.header_pause_button, 0, Qt.AlignmentFlag.AlignVCenter)
         return header
 
     def _build_tasks_page(self) -> QWidget:
@@ -340,7 +387,7 @@ class MainWindow(QMainWindow):
         version_label = QLabel(f"Installierte Version: {__version__}")
         version_label.setProperty("muted", True)
         update_layout.addWidget(version_label)
-        self.update_check_box = QCheckBox("Beim Start automatisch nach Updates suchen")
+        self.update_check_box = QCheckBox("Beim Start und danach alle 30 Minuten automatisch nach Updates suchen")
         self.update_check_box.setChecked(self.config.settings.check_updates_on_start)
         update_layout.addWidget(self.update_check_box)
         update_hint = QLabel(
@@ -366,15 +413,23 @@ class MainWindow(QMainWindow):
         dock.setFixedHeight(66)
         layout = QHBoxLayout(dock)
         layout.setContentsMargins(28, 12, 28, 12)
-        self.progress_text = QLabel("Bereit")
-        self.progress_text.setMinimumWidth(250)
+        self.progress_text = _ElidedLabel("Bereit")
+        self.progress_text.setFixedWidth(PROGRESS_TEXT_WIDTH)
         self.progress_text.setProperty("muted", True)
         self.progress_bar = QProgressBar()
+        self.progress_bar.setFixedWidth(PROGRESS_BAR_WIDTH)
         self.progress_bar.setRange(0, 100)
         self.progress_bar.setValue(0)
         self.progress_bar.setFormat("%p %")
+        self.dock_pause_button = QPushButton("Pausieren")
+        self.dock_pause_button.setObjectName("DockPauseButton")
+        self.dock_pause_button.setFixedHeight(34)
+        if hasattr(self, "_toggle_pause"):
+            self.dock_pause_button.clicked.connect(self._toggle_pause)
         layout.addWidget(self.progress_text)
-        layout.addWidget(self.progress_bar, 1)
+        layout.addWidget(self.progress_bar)
+        layout.addWidget(self.dock_pause_button)
+        layout.addStretch(1)
         return dock
 
     def _build_tray(self) -> None:
@@ -432,6 +487,11 @@ class MainWindow(QMainWindow):
 
     def _refresh_tasks(self) -> None:
         self.task_table.setRowCount(len(self.config.tasks))
+        running_id = self.coordinator.running_task_id
+        queued_ids = self.coordinator.queued_task_ids
+        paused_id = self.coordinator.paused_task_id
+        is_globally_paused = self.config.settings.paused
+
         for row, task in enumerate(self.config.tasks):
             name = QTableWidgetItem(task.name)
             name.setData(Qt.ItemDataRole.UserRole, task.id)
@@ -443,9 +503,26 @@ class MainWindow(QMainWindow):
                 TriggerMode.INTERVAL: f"Alle {task.interval_minutes} Min.",
             }[task.trigger]
             trigger = QTableWidgetItem(trigger_text)
-            status = QTableWidgetItem(self._runtime_state_text(self.coordinator.task_state(task.id)))
+
+            base_state = self.coordinator.task_state(task.id)
+            if task.id == running_id:
+                val = self.progress_bar.value()
+                status_text = f"🔄 Läuft ({val}%)"
+                tip = f"Wird synchronisiert ({val}%)\n{self.progress_text.toolTip()}"
+            elif is_globally_paused and (task.id == paused_id or task.id in queued_ids):
+                status_text = "⏸ Pausiert"
+                tip = "Aufgabe pausiert – setzt beim Klick auf Fortsetzen fort."
+            elif task.id in queued_ids:
+                pos = queued_ids.index(task.id) + 1
+                status_text = f"⏳ In Warteschlange (#{pos})"
+                tip = f"Steht an Position {pos} der Warteschlange"
+            else:
+                status_text = self._runtime_state_text(base_state)
+                tip = status_text
+
+            status = QTableWidgetItem(status_text)
             for column, item in enumerate((name, pair, direction, trigger, status)):
-                item.setToolTip(item.text())
+                item.setToolTip(tip if column == 4 else item.text())
                 self.task_table.setItem(row, column, item)
 
     def _selected_task(self) -> SyncTask | None:
@@ -511,6 +588,7 @@ class MainWindow(QMainWindow):
     def _save_settings(self) -> None:
         settings = self.config.settings
         old_autostart = settings.autostart
+        old_update_check = settings.check_updates_on_start
         settings.autostart = self.autostart_check.isChecked()
         settings.font_family = self.font_combo.currentText()
         settings.font_size = self.font_size_spin.value()
@@ -528,18 +606,22 @@ class MainWindow(QMainWindow):
             return
         apply_theme(QApplication.instance(), settings)
         self._append_log("Einstellungen", "Erfolg", "Darstellung und Systemstart wurden übernommen.")
+        if settings.check_updates_on_start and not old_update_check:
+            QTimer.singleShot(0, self._automatic_update_check)
+        elif not settings.check_updates_on_start:
+            self.update_retry_timer.stop()
 
     def _automatic_update_check(self) -> None:
         settings = self.config.settings
-        if not settings.check_updates_on_start or self.coordinator.is_running:
+        if not settings.check_updates_on_start:
+            self.update_retry_timer.stop()
             return
-        if settings.last_update_check:
-            try:
-                last_check = datetime.fromisoformat(settings.last_update_check)
-            except ValueError:
-                last_check = datetime.min
-            if datetime.now() - last_check < timedelta(hours=24):
+        if self.coordinator.is_running or self.updater.busy:
+            if not self.update_retry_timer.isActive():
+                self.update_retry_timer.start()
             return
+        self.update_retry_timer.stop()
+        self.update_check_timer.start(UPDATE_CHECK_INTERVAL_MS)
         self._check_updates(manual=False)
 
     def _check_updates(self, manual: bool) -> None:
@@ -558,12 +640,18 @@ class MainWindow(QMainWindow):
         self._mark_update_checked()
         self._update_progress(100, f"Version {info.version} ist verfügbar")
         self._append_log("Update", "Hinweis", f"Version {info.version} ist verfügbar.")
+        self._set_update_indicator(info.version)
+        if not manual and self._notified_update_version == info.version:
+            return
+        self._notified_update_version = info.version
         dialog = UpdateDialog(__version__, info, getattr(sys, "frozen", False), self)
         if dialog.exec() == UpdateDialog.DialogCode.Accepted:
             self.updater.download(info)
 
     def _on_no_update(self, manual: bool) -> None:
         self._mark_update_checked()
+        self._set_update_indicator(None)
+        self._notified_update_version = None
         self._update_progress(100, "SyncVito ist aktuell")
         self._append_log("Update", "Erfolg", "Die installierte Version ist aktuell.")
         if manual:
@@ -579,6 +667,18 @@ class MainWindow(QMainWindow):
                 f"{message}\n\nBitte die Netzwerkverbindung prüfen und anschließend erneut versuchen.",
             )
 
+    def _set_update_indicator(self, version: str | None) -> None:
+        available = bool(version)
+        self.settings_nav_button.setText("Einstellungen  •  UPDATE" if available else "Einstellungen")
+        self.settings_nav_button.setProperty("updateAvailable", available)
+        description = f"SyncVito {version} ist verfügbar" if version else ""
+        self.settings_nav_button.setToolTip(description)
+        self.settings_nav_button.setAccessibleDescription(description)
+        style = self.settings_nav_button.style()
+        style.unpolish(self.settings_nav_button)
+        style.polish(self.settings_nav_button)
+        self.settings_nav_button.update()
+
     def _install_update(self, path: Path, info: UpdateInfo) -> None:
         try:
             self.updater.service.launch_installer(path, info.version)
@@ -598,6 +698,16 @@ class MainWindow(QMainWindow):
         self._append_log("Update", "Erfolg", message)
         self.tray.showMessage("SyncVito aktualisiert", message, QSystemTrayIcon.MessageIcon.Information, 5000)
 
+    def _show_previous_update_error(self) -> None:
+        message = self.updater.service.take_install_error()
+        if message:
+            self._append_log("Update", "Fehler", message)
+            QMessageBox.warning(
+                self,
+                "Update nicht abgeschlossen",
+                f"{message}\n\nGestartete Version: {__version__}\nProtokolle: {self.updater.service.update_directory}",
+            )
+
     def _cleanup_update_installers(self, attempts_remaining: int = 1) -> None:
         _removed, pending = self.updater.service.cleanup_installers()
         if pending and attempts_remaining > 1:
@@ -621,17 +731,43 @@ class MainWindow(QMainWindow):
         self.tray_sync_action.setEnabled(update_idle and sync_idle)
         self.update_button.setEnabled(update_idle and sync_idle)
         self.tray_update_action.setEnabled(update_idle and sync_idle)
+        self._update_pause_action()
+        self._refresh_tasks()
 
     def _toggle_pause(self) -> None:
         self.coordinator.set_paused(not self.config.settings.paused)
         self._update_pause_action()
 
     def _update_pause_action(self) -> None:
-        self.pause_action.setText("Fortsetzen" if self.config.settings.paused else "Pausieren")
+        is_paused = self.config.settings.paused
+        if is_paused:
+            btn_text = "▶ Fortsetzen"
+            tray_text = "Fortsetzen"
+        else:
+            btn_text = "⏸ Pausieren" if self.coordinator.is_running else "Pausieren"
+            tray_text = "Pausieren"
+
+        self.pause_action.setText(tray_text)
+        for btn in (getattr(self, "header_pause_button", None), getattr(self, "dock_pause_button", None)):
+            if btn is not None:
+                btn.setText(btn_text)
+                btn.setProperty("primary", is_paused)
+                btn.style().unpolish(btn)
+                btn.style().polish(btn)
 
     def _update_progress(self, value: int, detail: str) -> None:
         self.progress_bar.setValue(value)
         self.progress_text.setText(detail)
+        running_id = self.coordinator.running_task_id
+        if running_id:
+            for row in range(self.task_table.rowCount()):
+                item = self.task_table.item(row, 0)
+                if item and item.data(Qt.ItemDataRole.UserRole) == running_id:
+                    status_item = self.task_table.item(row, 4)
+                    if status_item:
+                        status_item.setText(f"🔄 Läuft ({value}%)")
+                        status_item.setToolTip(detail)
+                    break
 
     def _append_log(self, action: str, level: str, detail: str) -> None:
         row = self.log_table.rowCount()

src/syncvito/models.py

@@ -137,6 +137,7 @@ class AppSettings:
     font_weight: str = "regular"
     ui_scale: int = 100
     paused: bool = False
+    pending_queue: list[str] = field(default_factory=list)
     check_updates_on_start: bool = True
     last_update_check: str | None = None
 
@@ -148,6 +149,7 @@ class AppSettings:
             self.font_weight = "regular"
         if not self.font_family.strip():
             self.font_family = "Segoe UI Variable"
+        self.pending_queue = [str(item) for item in self.pending_queue if str(item).strip()]
 
     def to_dict(self) -> dict[str, Any]:
         """Serialisiert die Einstellungen."""
@@ -163,6 +165,7 @@ class AppSettings:
             font_weight=str(data.get("font_weight", "regular")),
             ui_scale=int(data.get("ui_scale", 100)),
             paused=bool(data.get("paused", False)),
+            pending_queue=[str(item) for item in data.get("pending_queue", []) if str(item).strip()],
             check_updates_on_start=bool(data.get("check_updates_on_start", True)),
             last_update_check=data.get("last_update_check"),
         )

src/syncvito/sync_engine.py

@@ -4,13 +4,15 @@ from __future__ import annotations
 
 import os
 import shutil
+import stat
 from collections.abc import Callable
 from contextlib import suppress
 from dataclasses import dataclass, field
 from datetime import datetime
 from pathlib import Path
+from time import monotonic
 
-from syncvito.file_locks import LockingProcess, find_locking_processes
+from syncvito.file_locks import LockingProcess, find_locking_processes, is_file_locked
 from syncvito.models import ConflictMode, DeleteMode, SyncDirection, SyncTask
 from syncvito.state_store import StateStore
 
@@ -59,6 +61,7 @@ class SyncResult:
     deleted: int = 0
     conflicts: int = 0
     skipped: int = 0
+    paused: bool = False
     blocked: list[BlockedFile] = field(default_factory=list)
     errors: list[str] = field(default_factory=list)
     inaccessible: bool = False
@@ -66,7 +69,7 @@ class SyncResult:
     @property
     def successful(self) -> bool:
         """Zeigt an, ob der Lauf ohne Fehler und Sperren abgeschlossen wurde."""
-        return not self.errors and not self.blocked and not self.inaccessible
+        return not self.errors and not self.blocked and not self.inaccessible and not self.paused
 
 
 @dataclass(frozen=True, slots=True)
@@ -84,14 +87,33 @@ class SyncEngine:
     def __init__(self, state_store: StateStore | None = None) -> None:
         self.state_store = state_store or StateStore()
 
-    def synchronize(self, task: SyncTask, progress: ProgressCallback | None = None) -> SyncResult:
+    def synchronize(
+        self,
+        task: SyncTask,
+        progress: ProgressCallback | None = None,
+        cancel_check: Callable[[], bool] | None = None,
+    ) -> SyncResult:
         """Führt eine Aufgabe aus und isoliert Fehler auf einzelne Dateien."""
         task.validate()
         source_root = Path(task.source)
         target_root = Path(task.target)
+        if cancel_check and cancel_check():
+            return SyncResult(paused=True)
+        if progress:
+            progress(0, f"{task.name}: Ordner werden geprüft …")
         self._validate_roots(source_root, target_root)
-        source_files, source_dirs = self._inventory(source_root, task.selected_paths)
-        target_files, target_dirs = self._inventory(target_root, task.selected_paths)
+        source_files, source_dirs = self._inventory(
+            source_root, task.selected_paths, progress, "Quelle", cancel_check=cancel_check
+        )
+        if cancel_check and cancel_check():
+            return SyncResult(paused=True)
+        target_files, target_dirs = self._inventory(
+            target_root, task.selected_paths, progress, "Ziel", cancel_check=cancel_check
+        )
+        if cancel_check and cancel_check():
+            return SyncResult(paused=True)
+        if progress:
+            progress(0, f"{task.name}: Änderungen werden verglichen …")
         previous = self.state_store.get(task.id)
 
         if task.direction is SyncDirection.ONE_WAY:
@@ -112,22 +134,48 @@ class SyncEngine:
 
         result = SyncResult()
         total = max(1, len(operations))
+        stages: list[str] = []
+        for op in operations:
+            is_dir = op.kind in {"Ordner anlegen", "Ordner löschen"}
+            stage_name = _operation_stage(op.relative, task.selected_paths, is_dir=is_dir)
+            if stage_name not in stages:
+                stages.append(stage_name)
+
         if progress:
             progress(0, "Änderungen werden vorbereitet …")
         for index, operation in enumerate(operations, start=1):
+            is_dir = operation.kind in {"Ordner anlegen", "Ordner löschen"}
+            stage = _operation_stage(operation.relative, task.selected_paths, is_dir=is_dir)
+            if cancel_check and cancel_check():
+                result.paused = True
+                if progress:
+                    progress(round((index - 1) / total * 100), f"Pausiert bei: {stage} – {operation.relative}")
+                break
             try:
                 self._execute(operation, result)
-            except PermissionError as exc:
-                processes = tuple(find_locking_processes(operation.target))
-                result.blocked.append(BlockedFile(operation.target, processes))
-                result.errors.append(f"Zugriff verweigert: {operation.target} ({exc})")
             except (OSError, shutil.Error) as exc:
-                result.errors.append(f"{operation.target}: {exc}")
+                failed_path = (
+                    Path(exc.filename2 or exc.filename)
+                    if isinstance(exc, OSError) and (exc.filename2 or exc.filename)
+                    else operation.target
+                )
+                blocked_path = _blocked_path(operation, exc)
+                if blocked_path is not None:
+                    processes = tuple(find_locking_processes(blocked_path))
+                    result.blocked.append(BlockedFile(blocked_path, processes))
+                elif isinstance(exc, PermissionError):
+                    result.errors.append(f"Zugriff verweigert: {failed_path} ({exc})")
+                else:
+                    result.errors.append(f"{failed_path}: {exc}")
             if progress:
+                if len(stages) > 1:
+                    stage_idx = stages.index(stage) + 1
+                    detail = f"[{stage_idx}/{len(stages)} {stage}] {operation.kind}: {operation.relative}"
+                else:
                     detail = f"{operation.kind}: {operation.relative}"
                 progress(round(index / total * 100), detail)
 
-        if not operations and progress:
+        if not operations and progress and not result.paused:
             progress(100, "Keine Änderungen gefunden")
 
         if task.direction is SyncDirection.BIDIRECTIONAL and result.successful:
@@ -149,15 +197,34 @@ class SyncEngine:
             raise UnavailablePathError(f"Ziel ist kein Ordner: {target_root}")
 
     @staticmethod
-    def _inventory(root: Path, selected_paths: list[str]) -> tuple[dict[str, FileRecord], set[str]]:
+    def _inventory(
+        root: Path,
+        selected_paths: list[str],
+        progress: ProgressCallback | None = None,
+        label: str = "Ordner",
+        cancel_check: Callable[[], bool] | None = None,
+    ) -> tuple[dict[str, FileRecord], set[str]]:
         files: dict[str, FileRecord] = {}
         directories: set[str] = set()
         selections = tuple(Path(item).parts for item in selected_paths)
+        last_report = monotonic()
+        if progress:
+            progress(0, f"{label} wird eingelesen: {root}")
         try:
             for current, dir_names, file_names in os.walk(root):
+                if cancel_check and cancel_check():
+                    break
                 current_path = Path(current)
                 relative_dir = current_path.relative_to(root)
-                dir_names[:] = [name for name in dir_names if not (current_path / name).is_symlink()]
+                dir_names[:] = [
+                    name
+                    for name in dir_names
+                    if _is_selected((relative_dir / name).parts, selections)
+                    and not _is_directory_link(current_path / name)
+                ]
+                if progress and monotonic() - last_report >= 0.25:
+                    progress(0, f"{label}: {len(files)} Dateien gefunden – {current_path}")
+                    last_report = monotonic()
                 for directory_name in dir_names:
                     relative = relative_dir / directory_name
                     if _is_selected(relative.parts, selections):
@@ -174,6 +241,9 @@ class SyncEngine:
                     except OSError:
                         continue
                     files[str(relative)] = FileRecord(path, file_stat.st_size, file_stat.st_mtime_ns)
+                    if progress and monotonic() - last_report >= 0.25:
+                        progress(0, f"{label}: {len(files)} Dateien gefunden – {current_path}")
+                        last_report = monotonic()
         except OSError as exc:
             raise UnavailablePathError(f"Ordner kann nicht gelesen werden: {root}") from exc
         return files, directories
@@ -295,6 +365,31 @@ class SyncEngine:
         }
 
 
+def _is_directory_link(path: Path) -> bool:
+    """Erkennt auch Windows-Junctions unter Python 3.11 ohne Path.is_junction."""
+    metadata = path.lstat()
+    return stat.S_ISLNK(metadata.st_mode) or getattr(metadata, "st_reparse_tag", 0) == stat.IO_REPARSE_TAG_MOUNT_POINT
+
+
+def _blocked_path(operation: _Operation, exc: OSError | shutil.Error) -> Path | None:
+    """Ordnet auch Windows-Kopierfehler ohne Dateinamen der gesperrten Seite zu."""
+    winerror = getattr(exc, "winerror", None)
+    if winerror not in {5, 32, 33}:
+        return None
+    reported = (exc.filename2 or exc.filename) if isinstance(exc, OSError) else None
+    if reported and winerror in {32, 33}:
+        return Path(reported)
+    candidates = [Path(reported)] if reported else []
+    candidates.extend(path for path in (operation.source, operation.target) if path is not None)
+    for path in dict.fromkeys(candidates):
+        if is_file_locked(path):
+            return path
+    # Eine inzwischen freigegebene Datei beim nächsten Lauf erneut versuchen.
+    if winerror in {32, 33}:
+        return operation.source or operation.target
+    return None
+
+
 def _atomic_copy(source: Path, target: Path) -> None:
     temporary = target.with_name(f".{target.name}.syncvito.tmp")
     try:
@@ -326,3 +421,17 @@ def _is_selected(parts: tuple[str, ...], selections: tuple[tuple[str, ...], ...]
     if not selections:
         return True
     return any(parts[: len(selection)] == selection or selection[: len(parts)] == parts for selection in selections)
+
+
+def _operation_stage(relative: str, selected_paths: list[str], is_dir: bool = False) -> str:
+    """Ermittelt den relevanten Hauptordner oder die gewählte Unterauswahl."""
+    parts = Path(relative).parts
+    if not parts:
+        return "Hauptordner"
+    for selected in selected_paths:
+        selected_parts = Path(selected).parts
+        if parts[: len(selected_parts)] == selected_parts:
+            return "/".join(selected_parts)
+    if len(parts) > 1:
+        return parts[0]
+    return parts[0] if is_dir else "Hauptordner"

src/syncvito/theme.py

@@ -52,6 +52,12 @@ def _stylesheet(scale: float) -> str:
                                   padding: {round(10 * scale)}px {round(12 * scale)}px; color: #9CACBF; }}
         QPushButton[nav="true"]:hover {{ background: #17212E; color: #E8EDF4; }}
         QPushButton[nav="true"]:checked {{ background: #1B2A3D; color: #FFFFFF; border-color: #2A568B; }}
+        QPushButton[nav="true"][updateAvailable="true"] {{ background: #3A2412; color: #FFF0DF;
+                                                            border-color: #EA580C; }}
+        QPushButton[nav="true"][updateAvailable="true"]:hover {{ background: #4A2D14; color: #FFFFFF;
+                                                                  border-color: #FF7A2F; }}
+        QPushButton[nav="true"][updateAvailable="true"]:focus {{ border: 2px solid #FF9A5B;
+                                                                  padding: {round(9 * scale)}px {round(11 * scale)}px; }}
         QLineEdit, QComboBox, QSpinBox, QListWidget, QTreeView, QTableWidget {{
             background: #0E141D; border: 1px solid #304052; border-radius: {radius}px;
             padding: {round(7 * scale)}px; color: #E8EDF4;

src/syncvito/updater.py

@@ -116,6 +116,7 @@ def _start_installer_after_exit(
     arguments: list[str],
     wait_pids: Iterable[int],
     bootstrap_log_path: Path,
+    application_path: Path,
 ) -> None:
     """Startet Inno Setup erst nach dem Ende aller PyInstaller-Prozesse."""
     if os.name != "nt":
@@ -129,42 +130,71 @@ def _start_installer_after_exit(
 
     normalized_pids = sorted({int(pid) for pid in wait_pids if int(pid) > 0})
     pid_list = ", ".join(str(pid) for pid in normalized_pids)
-    setup_arguments = ", ".join(_powershell_literal(argument) for argument in arguments)
+    setup_arguments = _powershell_literal(subprocess.list2cmdline(arguments))
+    result_path = bootstrap_log_path.parent / "update-result.json"
     script = f"""
 $ErrorActionPreference = 'Stop'
 $bootstrapLog = {_powershell_literal(bootstrap_log_path)}
+$applicationPath = {_powershell_literal(application_path)}
+$resultPath = {_powershell_literal(result_path)}
+$setupExitCode = $null
+function Write-UpdateResult([bool]$success, [string]$message) {{
+    $result = @{{ success = $success; message = $message; exit_code = $setupExitCode }} | ConvertTo-Json
+    [System.IO.File]::WriteAllText($resultPath, $result, [System.Text.UTF8Encoding]::new($false))
+}}
 try {{
     [System.IO.File]::WriteAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Warte auf SyncVito-Prozesse: {pid_list}' + [Environment]::NewLine)
     )
-    foreach ($processId in @({pid_list})) {{
     $deadline = [DateTime]::UtcNow.AddMinutes(2)
-        while (Get-Process -Id $processId -ErrorAction SilentlyContinue) {{
+    $lastWaiting = ''
+    while ($true) {{
+        $waiting = @(
+            foreach ($processId in @({pid_list})) {{
+                Get-Process -Id $processId -ErrorAction SilentlyContinue
+            }}
+            Get-Process -Name ([System.IO.Path]::GetFileNameWithoutExtension($applicationPath)) -ErrorAction SilentlyContinue |
+                Where-Object {{ -not $_.Path -or $_.Path -eq $applicationPath }}
+        )
+        if ($waiting.Count -eq 0) {{ break }}
+        $waitingIds = ($waiting.Id | Sort-Object -Unique) -join ', '
+        if ($waitingIds -ne $lastWaiting) {{
+            [System.IO.File]::AppendAllText($bootstrapLog, 'Noch aktiv: ' + $waitingIds + [Environment]::NewLine)
+            $lastWaiting = $waitingIds
+        }}
         if ([DateTime]::UtcNow -ge $deadline) {{
-                throw "SyncVito-Prozess $processId wurde nicht innerhalb von zwei Minuten beendet."
+            throw "SyncVito ist noch aktiv (Prozesse: $waitingIds). Bitte alle Instanzen im Infobereich ueber Beenden schliessen und das Update erneut starten."
         }}
         Start-Sleep -Milliseconds 200
     }}
-    }}
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Starte verifizierten Installer.' + [Environment]::NewLine)
     )
-    $setupArguments = @({setup_arguments})
-    & {_powershell_literal(installer_path)} @setupArguments
-    $setupExitCode = $LASTEXITCODE
+    $env:PYINSTALLER_RESET_ENVIRONMENT = '1'
+    $setupArguments = {setup_arguments}
+    $setup = Start-Process -FilePath {_powershell_literal(installer_path)} -ArgumentList $setupArguments -PassThru -WindowStyle Hidden
+    # Nur auf Setup warten: -Wait wuerde auch den neu gestarteten Client abwarten.
+    $setup.WaitForExit()
+    $setupExitCode = $setup.ExitCode
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Installer-Exitcode: ' + $setupExitCode + [Environment]::NewLine)
     )
+    if ($null -eq $setupExitCode -or $setupExitCode -ne 0) {{
+        throw "Installation abgebrochen (Exitcode: $setupExitCode). Details stehen im Inno-Setup-Protokoll im Update-Verzeichnis."
+    }}
+    Write-UpdateResult $true ''
     exit $setupExitCode
 }}
 catch {{
+    $failureMessage = $_.Exception.Message
     [System.IO.File]::AppendAllText(
         $bootstrapLog,
         ((Get-Date).ToString('o') + ' Bootstrap-Fehler: ' + $_.Exception.Message + [Environment]::NewLine)
     )
+    Write-UpdateResult $false $failureMessage
     exit 1
 }}
 """
@@ -296,7 +326,11 @@ class GiteaUpdateService:
             raise UpdateInstallError("Updates können nur aus der installierten Windows-Version gestartet werden.")
         installer = installer_path.resolve()
         expected_name = f"SyncVitoSetup-{version}.exe"
-        if installer.parent != self.update_directory.resolve() or installer.name != expected_name or not installer.is_file():
+        if (
+            installer.parent != self.update_directory.resolve()
+            or installer.name != expected_name
+            or not installer.is_file()
+        ):
             raise UpdateInstallError("Der geprüfte Installer wurde nicht gefunden.")
 
         safe_version = re.sub(r"[^0-9A-Za-z._-]+", "_", version).strip("._") or "unknown"
@@ -316,10 +350,24 @@ class GiteaUpdateService:
             f"/LOG={setup_log}",
         ]
         try:
-            _start_installer_after_exit(installer, arguments, wait_pids, bootstrap_log)
+            _start_installer_after_exit(installer, arguments, wait_pids, bootstrap_log, current_executable)
         except (OSError, ValueError, UpdateError) as exc:
             raise UpdateInstallError(f"Die Installation konnte nicht gestartet werden: {exc}") from exc
 
+    def take_install_error(self) -> str | None:
+        """Liest das Ergebnis des externen Wächters einmalig; Protokolle bleiben erhalten."""
+        result_path = self.update_directory / "update-result.json"
+        try:
+            result = json.loads(result_path.read_text(encoding="utf-8"))
+            if not isinstance(result, dict) or not isinstance(result.get("success"), bool):
+                return None
+            result_path.unlink()
+        except (OSError, ValueError):
+            return None
+        if result["success"]:
+            return None
+        return str(result.get("message") or "Die Installation wurde nicht abgeschlossen.")
+
     def cleanup_installers(self) -> tuple[int, int]:
         """Entfernt ausschließlich von SyncVito verwaltete Setup-Dateien."""
         try:

tests/test_coordinator.py

@@ -0,0 +1,139 @@
+from pathlib import Path
+
+import pytest
+from PyQt6.QtWidgets import QApplication
+
+from syncvito.config_store import ConfigStore
+from syncvito.coordinator import SyncCoordinator
+from syncvito.models import AppConfig, SyncTask, TaskRuntimeState
+from syncvito.sync_engine import BlockedFile, SyncResult
+
+
+@pytest.fixture
+def coordinator(tmp_path: Path):
+    application = QApplication.instance() or QApplication([])
+    task = SyncTask(name="AppData", source=str(tmp_path / "source"), target=str(tmp_path / "target"))
+    coordinator = SyncCoordinator(AppConfig(tasks=[task]), ConfigStore(tmp_path / "config.json"))
+    yield coordinator
+    coordinator._schedule_timer.stop()
+    coordinator._retry_timer.stop()
+    coordinator.stop()
+    assert application is not None
+
+
+def test_many_locks_have_compact_banner_and_full_paths_in_log(coordinator: SyncCoordinator) -> None:
+    banners = []
+    logs = []
+    coordinator.lock_changed.connect(banners.append)
+    coordinator.log_created.connect(lambda *entry: logs.append(entry))
+    blocked = [BlockedFile(Path(f"AppData/Programm{index}/Cookies")) for index in range(300)]
+    task = coordinator.config.tasks[0]
+
+    coordinator._on_finished(task.id, SyncResult(copied=123, blocked=blocked))
+
+    assert len(banners[-1]) < 400
+    assert "123 kopiert" in banners[-1]
+    assert "300 Dateien gesperrt" in banners[-1]
+    assert "unvollständig" in banners[-1]
+    assert len(logs) == 301
+    assert str(blocked[-1].path) in logs[-1][2]
+    assert coordinator.task_state(task.id) is TaskRuntimeState.WAITING_FOR_RELEASE
+
+    coordinator._on_finished(task.id, SyncResult(copied=300))
+    assert banners[-1] == ""
+    assert task.id not in coordinator._retry_tasks
+    assert coordinator.task_state(task.id) is TaskRuntimeState.ACTIVE
+
+
+def test_errors_are_visible_even_when_other_files_are_locked(coordinator: SyncCoordinator) -> None:
+    logs = []
+    coordinator.log_created.connect(lambda *entry: logs.append(entry))
+    task = coordinator.config.tasks[0]
+    coordinator._on_finished(task.id, SyncResult(blocked=[BlockedFile(Path("Cookies"))], errors=["Zugriff verweigert"]))
+    assert coordinator.task_state(task.id) is TaskRuntimeState.ERROR
+    assert any(level == "Fehler" and detail == "Zugriff verweigert" for _, level, detail in logs)
+
+
+@pytest.mark.parametrize("all_locked", [False, True])
+def test_retry_can_run_after_partial_release(
+    coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch, all_locked: bool
+) -> None:
+    task = coordinator.config.tasks[0]
+    coordinator._retry_tasks[task.id] = [Path("dauerhaft"), Path("freigegeben")]
+    queued = []
+    monkeypatch.setattr(coordinator, "enqueue", queued.append)
+    monkeypatch.setattr("syncvito.coordinator.is_file_locked", lambda path: all_locked or path.name == "dauerhaft")
+    coordinator._check_retries()
+    assert queued == ([] if all_locked else [task.id])
+
+
+def test_retry_queues_all_ready_tasks(coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch) -> None:
+    coordinator._retry_tasks = {"first": [], "second": []}
+    queued = []
+    monkeypatch.setattr(coordinator, "enqueue", queued.append)
+    coordinator._check_retries()
+    assert queued == ["first", "second"]
+
+
+def test_start_resets_stale_progress_before_worker_starts(
+    coordinator: SyncCoordinator, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    from types import SimpleNamespace
+
+    messages = []
+    workers = []
+    coordinator.progress_changed.connect(lambda *entry: messages.append(entry))
+
+    def start(worker) -> None:
+        assert messages and messages[-1][0] == 0
+        assert "AppData" in messages[-1][1]
+        workers.append(worker)
+
+    monkeypatch.setattr(coordinator, "pool", SimpleNamespace(start=start))
+    coordinator.enqueue(coordinator.config.tasks[0].id)
+    assert len(workers) == 1
+    assert coordinator.current_overall_status() == ("active", "Synchronisierung läuft")
+
+
+def test_pause_and_resume_preserves_queue_and_state(coordinator: SyncCoordinator) -> None:
+    task1 = coordinator.config.tasks[0]
+    task2 = SyncTask(name="Documents", source="c:/src2", target="c:/dst2")
+    coordinator.config.tasks.append(task2)
+
+    # Global pausieren
+    coordinator.set_paused(True)
+    assert coordinator.config.settings.paused
+    assert coordinator.current_overall_status() == ("paused", "Pausiert")
+
+    # Aufgaben in Warteschlange einreihen
+    coordinator.enqueue(task1.id)
+    coordinator.enqueue(task2.id)
+
+    assert coordinator.queued_task_ids == [task1.id, task2.id]
+    assert coordinator.config.settings.pending_queue == [task1.id, task2.id]
+
+    # Fortsetzen
+    workers = []
+    from types import SimpleNamespace
+
+    coordinator.pool = SimpleNamespace(start=workers.append)
+    coordinator.set_paused(False)
+
+    assert not coordinator.config.settings.paused
+    assert len(workers) == 1
+    assert coordinator.running_task_id == task1.id
+    assert coordinator.queued_task_ids == [task2.id]
+
+
+def test_stop_persists_running_task_and_queue_for_restart(coordinator: SyncCoordinator) -> None:
+    task1 = coordinator.config.tasks[0]
+    task2 = SyncTask(name="Documents", source="c:/src2", target="c:/dst2")
+    coordinator.config.tasks.append(task2)
+
+    coordinator._running_task_id = task1.id
+    coordinator._queue.append(task2.id)
+
+    coordinator.stop()
+
+    assert coordinator.config.settings.paused is True
+    assert coordinator.config.settings.pending_queue == [task1.id, task2.id]

tests/test_file_locks.py

@@ -0,0 +1,74 @@
+import ctypes
+import os
+from contextlib import contextmanager
+from ctypes import wintypes
+from pathlib import Path
+
+import pytest
+
+from syncvito.file_locks import is_file_locked
+from syncvito.models import SyncTask
+from syncvito.state_store import StateStore
+from syncvito.sync_engine import SyncEngine
+
+pytestmark = pytest.mark.skipif(os.name != "nt", reason="Windows-Dateisperren")
+
+
+@contextmanager
+def exclusive_lock(path: Path):
+    kernel32 = ctypes.WinDLL("kernel32", use_last_error=True)
+    kernel32.CreateFileW.argtypes = [
+        wintypes.LPCWSTR,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        ctypes.c_void_p,
+        wintypes.DWORD,
+        wintypes.DWORD,
+        wintypes.HANDLE,
+    ]
+    kernel32.CreateFileW.restype = wintypes.HANDLE
+    kernel32.CloseHandle.argtypes = [wintypes.HANDLE]
+    kernel32.CloseHandle.restype = wintypes.BOOL
+    handle = kernel32.CreateFileW(str(path), 0x80000000, 0, None, 3, 0x80, None)
+    assert handle != ctypes.c_void_p(-1).value, ctypes.get_last_error()
+    try:
+        yield
+    finally:
+        assert kernel32.CloseHandle(handle)
+
+
+def test_detects_real_lock_and_release(tmp_path: Path) -> None:
+    path = tmp_path / "gesperrt.txt"
+    path.write_text("Inhalt")
+    assert not is_file_locked(path)
+    with exclusive_lock(path):
+        assert is_file_locked(path)
+    assert not is_file_locked(path)
+    assert not is_file_locked(tmp_path / "fehlt.txt")
+
+
+@pytest.mark.parametrize("locked_side", ["source", "target"])
+def test_sync_preserves_backup_and_continues_past_lock(tmp_path: Path, locked_side: str) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    target.mkdir()
+    (source / "a.txt").write_text("neue Version")
+    (target / "a.txt").write_text("alt")
+    (source / "b.txt").write_text("lesbar")
+    locked_path = tmp_path / locked_side / "a.txt"
+    task = SyncTask(name="AppData", source=str(source), target=str(target))
+    engine = SyncEngine(StateStore(tmp_path / "state.json"))
+
+    with exclusive_lock(locked_path):
+        result = engine.synchronize(task)
+        assert not result.successful
+        assert [item.path for item in result.blocked] == [locked_path]
+        assert not result.errors
+        assert result.copied == 1
+        assert (target / "b.txt").read_text() == "lesbar"
+
+    assert (target / "a.txt").read_text() == "alt"
+    assert not list(target.glob("*.tmp"))
+    assert engine.synchronize(task).successful
+    assert (target / "a.txt").read_text() == "neue Version"

tests/test_progress_layout.py

@@ -0,0 +1,28 @@
+from types import SimpleNamespace
+
+from PyQt6.QtWidgets import QApplication
+
+from syncvito.main_window import PROGRESS_BAR_WIDTH, PROGRESS_TEXT_WIDTH, MainWindow
+
+
+def test_progress_widgets_keep_fixed_widths_for_long_paths() -> None:
+    application = QApplication.instance() or QApplication([])
+    owner = SimpleNamespace()
+    dock = MainWindow._build_progress_dock(owner)
+    dock.resize(900, 66)
+    dock.show()
+    application.processEvents()
+    bar_x = owner.progress_bar.x()
+    long_path = "Kopieren: " + "sehr-langer-ordner\\" * 20 + "wichtige-datei.ini"
+
+    owner.progress_text.setText(long_path)
+    application.processEvents()
+
+    assert owner.progress_text.width() == PROGRESS_TEXT_WIDTH
+    assert owner.progress_bar.width() == PROGRESS_BAR_WIDTH
+    assert owner.progress_bar.x() == bar_x
+    assert owner.progress_text.text() != long_path
+    assert "…" in owner.progress_text.text()
+    assert owner.progress_text.toolTip() == long_path
+    assert owner.progress_text.accessibleName() == long_path
+    dock.close()

tests/test_runtime_status.py

@@ -14,7 +14,14 @@ def test_healthy_active_tasks_are_green() -> None:
 
 def test_waiting_lock_has_priority_over_active_task() -> None:
     states = [TaskRuntimeState.ACTIVE, TaskRuntimeState.WAITING_FOR_RELEASE]
-    assert derive_overall_status(states, globally_paused=False) == ("error", "Wartet auf Dateifreigabe")
+    assert derive_overall_status(states, globally_paused=False) == ("error", "Unvollständig – Dateien gesperrt")
+
+
+def test_waiting_task_does_not_hide_running_sync() -> None:
+    assert derive_overall_status([TaskRuntimeState.WAITING_FOR_RELEASE], False, running=True) == (
+        "error",
+        "Synchronisierung läuft",
+    )
 
 
 def test_error_has_highest_priority() -> None:

tests/test_sync_engine.py

@@ -1,6 +1,8 @@
 import os
 from pathlib import Path
 
+import pytest
+
 from syncvito.models import ConflictMode, DeleteMode, SyncDirection, SyncTask
 from syncvito.state_store import StateStore
 from syncvito.sync_engine import SyncEngine
@@ -10,6 +12,103 @@ def _engine(tmp_path: Path) -> SyncEngine:
     return SyncEngine(StateStore(tmp_path / "state.json"))
 
 
+def test_progress_reports_scan_before_copying(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> None:
+    from itertools import count
+
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    (source / "datei.txt").write_text("Inhalt")
+    ticks = count()
+    monkeypatch.setattr("syncvito.sync_engine.monotonic", lambda: float(next(ticks)))
+    messages = []
+
+    def progress(value: int, detail: str) -> None:
+        messages.append((value, detail))
+        if "eingelesen" in detail or "Dateien gefunden" in detail:
+            assert value == 0
+            assert not (target / "datei.txt").exists()
+
+    result = _engine(tmp_path).synchronize(SyncTask(name="Test", source=str(source), target=str(target)), progress)
+
+    assert result.successful
+    assert "Ordner werden geprüft" in messages[0][1]
+    assert any("Quelle wird eingelesen" in detail for _, detail in messages)
+    assert any("Ziel wird eingelesen" in detail for _, detail in messages)
+    assert any("1 Dateien gefunden" in detail for _, detail in messages)
+    assert messages[-1][0] == 100
+
+
+@pytest.mark.skipif(os.name != "nt", reason="Windows-Junctions")
+def test_inventory_does_not_follow_windows_junctions(tmp_path: Path) -> None:
+    import _winapi
+
+    source = tmp_path / "source"
+    outside = tmp_path / "outside"
+    source.mkdir()
+    outside.mkdir()
+    (outside / "extern.txt").write_text("Nicht synchronisieren")
+    (source / "lokal.txt").write_text("Synchronisieren")
+    junction = source / "verknuepfung"
+    _winapi.CreateJunction(str(outside), str(junction))
+    try:
+        files, directories = SyncEngine._inventory(source, [])
+        assert set(files) == {"lokal.txt"}
+        assert "verknuepfung" not in directories
+    finally:
+        junction.rmdir()
+
+
+def test_inventory_prunes_unselected_subtrees(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> None:
+    source = tmp_path / "source"
+    (source / "auswahl").mkdir(parents=True)
+    (source / "ignorieren" / "unterordner").mkdir(parents=True)
+    (source / "auswahl" / "ja.txt").write_text("ja")
+    visited = []
+    original_walk = os.walk
+
+    def walk(*args, **kwargs):
+        for entry in original_walk(*args, **kwargs):
+            visited.append(Path(entry[0]))
+            yield entry
+
+    monkeypatch.setattr("syncvito.sync_engine.os.walk", walk)
+    files, _ = SyncEngine._inventory(source, ["auswahl"])
+    assert set(files) == {str(Path("auswahl/ja.txt"))}
+    assert visited == [source, source / "auswahl"]
+
+
+@pytest.mark.parametrize("winerror", [None, 5])
+def test_access_denied_is_not_reported_as_file_lock(
+    tmp_path: Path, monkeypatch: pytest.MonkeyPatch, winerror: int | None
+) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    (source / "geschuetzt.txt").write_text("geschützt")
+    (source / "lesbar.txt").write_text("lesbar")
+    from syncvito import sync_engine
+
+    copy = sync_engine._atomic_copy
+
+    def copy_with_denied_file(source_path: Path, target_path: Path) -> None:
+        if source_path.name == "geschuetzt.txt":
+            error = PermissionError(13, "Zugriff verweigert", str(source_path))
+            if winerror is not None:
+                error.winerror = winerror
+            raise error
+        copy(source_path, target_path)
+
+    monkeypatch.setattr(sync_engine, "_atomic_copy", copy_with_denied_file)
+    result = _engine(tmp_path).synchronize(SyncTask(name="AppData", source=str(source), target=str(target)))
+
+    assert not result.successful
+    assert not result.blocked
+    assert len(result.errors) == 1
+    assert str(source / "geschuetzt.txt") in result.errors[0]
+    assert (target / "lesbar.txt").read_text() == "lesbar"
+
+
 def test_one_way_copy_and_mirror_delete(tmp_path: Path) -> None:
     source = tmp_path / "source"
     target = tmp_path / "target"
@@ -124,3 +223,49 @@ def test_bidirectional_mirrors_known_deletion(tmp_path: Path) -> None:
 
     assert result.successful
     assert not (source / "entfernen.txt").exists()
+
+
+def test_stage_progress_reporting_for_multiple_folders(tmp_path: Path) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    (source / "AppData").mkdir(parents=True)
+    (source / "Documents").mkdir(parents=True)
+    (source / "AppData" / "config.json").write_text("{}", encoding="utf-8")
+    (source / "Documents" / "doc.txt").write_text("text", encoding="utf-8")
+    task = SyncTask(name="Backup", source=str(source), target=str(target))
+
+    messages: list[tuple[int, str]] = []
+    result = _engine(tmp_path).synchronize(task, progress=lambda v, d: messages.append((v, d)))
+
+    assert result.successful
+    assert any("[1/2 AppData]" in detail for _, detail in messages)
+    assert any("[2/2 Documents]" in detail for _, detail in messages)
+
+
+def test_pause_and_resume_continues_where_interrupted(tmp_path: Path) -> None:
+    source = tmp_path / "source"
+    target = tmp_path / "target"
+    source.mkdir()
+    (source / "a.txt").write_text("a", encoding="utf-8")
+    (source / "b.txt").write_text("b", encoding="utf-8")
+    (source / "c.txt").write_text("c", encoding="utf-8")
+    task = SyncTask(name="ResumeTest", source=str(source), target=str(target))
+    engine = _engine(tmp_path)
+
+    # 1. Unterbrechung nach der ersten Datei
+    def cancel_after_one() -> bool:
+        return (target / "a.txt").exists()
+
+    result_paused = engine.synchronize(task, cancel_check=cancel_after_one)
+    assert result_paused.paused
+    assert not result_paused.successful
+    assert (target / "a.txt").exists()
+    assert not (target / "c.txt").exists()
+
+    # 2. Fortsetzen: Bereits kopierte Datei a.txt wird übersprungen, b und c werden kopiert
+    result_resumed = engine.synchronize(task)
+    assert result_resumed.successful
+    assert result_resumed.copied == 2
+    assert (target / "a.txt").exists()
+    assert (target / "b.txt").exists()
+    assert (target / "c.txt").exists()

tests/test_update_schedule.py

@@ -0,0 +1,112 @@
+from types import SimpleNamespace
+
+from syncvito.main_window import UPDATE_CHECK_INTERVAL_MS, UPDATE_RETRY_INTERVAL_MS, MainWindow
+
+
+class FakeTimer:
+    def __init__(self, *, active: bool = False) -> None:
+        self.active = active
+        self.start_calls: list[int | None] = []
+        self.stop_calls = 0
+
+    def isActive(self) -> bool:  # noqa: N802 - Qt API
+        return self.active
+
+    def start(self, interval: int | None = None) -> None:
+        self.active = True
+        self.start_calls.append(interval)
+
+    def stop(self) -> None:
+        self.active = False
+        self.stop_calls += 1
+
+
+class FakeStyle:
+    def __init__(self) -> None:
+        self.unpolished = False
+        self.polished = False
+
+    def unpolish(self, _button: object) -> None:
+        self.unpolished = True
+
+    def polish(self, _button: object) -> None:
+        self.polished = True
+
+
+class FakeButton:
+    def __init__(self) -> None:
+        self.text = ""
+        self.properties: dict[str, object] = {}
+        self.tooltip = ""
+        self.accessible_description = ""
+        self.button_style = FakeStyle()
+        self.updated = False
+
+    def setText(self, text: str) -> None:  # noqa: N802 - Qt API
+        self.text = text
+
+    def setProperty(self, name: str, value: object) -> None:  # noqa: N802 - Qt API
+        self.properties[name] = value
+
+    def setToolTip(self, text: str) -> None:  # noqa: N802 - Qt API
+        self.tooltip = text
+
+    def setAccessibleDescription(self, text: str) -> None:  # noqa: N802 - Qt API
+        self.accessible_description = text
+
+    def style(self) -> FakeStyle:
+        return self.button_style
+
+    def update(self) -> None:
+        self.updated = True
+
+
+def _window(*, sync_running: bool = False, updater_busy: bool = False) -> SimpleNamespace:
+    checks: list[bool] = []
+    return SimpleNamespace(
+        config=SimpleNamespace(settings=SimpleNamespace(check_updates_on_start=True)),
+        coordinator=SimpleNamespace(is_running=sync_running),
+        updater=SimpleNamespace(busy=updater_busy),
+        update_check_timer=FakeTimer(active=True),
+        update_retry_timer=FakeTimer(),
+        _check_updates=lambda manual: checks.append(manual),
+        checks=checks,
+    )
+
+
+def test_automatic_update_check_runs_without_daily_throttle() -> None:
+    window = _window()
+
+    MainWindow._automatic_update_check(window)
+
+    assert window.checks == [False]
+    assert window.update_check_timer.start_calls == [UPDATE_CHECK_INTERVAL_MS]
+    assert window.update_retry_timer.stop_calls == 1
+
+
+def test_automatic_update_check_retries_while_sync_is_running() -> None:
+    window = _window(sync_running=True)
+
+    MainWindow._automatic_update_check(window)
+
+    assert window.checks == []
+    assert window.update_retry_timer.start_calls == [None]
+    assert UPDATE_RETRY_INTERVAL_MS == 60_000
+
+
+def test_periodic_update_interval_is_thirty_minutes() -> None:
+    assert UPDATE_CHECK_INTERVAL_MS == 30 * 60 * 1000
+
+
+def test_update_indicator_uses_text_and_accessible_description() -> None:
+    button = FakeButton()
+    window = SimpleNamespace(settings_nav_button=button)
+
+    MainWindow._set_update_indicator(window, "1.0.5")
+
+    assert button.text == "Einstellungen  •  UPDATE"
+    assert button.properties["updateAvailable"] is True
+    assert button.tooltip == "SyncVito 1.0.5 ist verfügbar"
+    assert button.accessible_description == button.tooltip
+    assert button.button_style.unpolished and button.button_style.polished
+    assert button.updated

tests/test_update_watcher.py

@@ -0,0 +1,161 @@
+"""Führt den echten PowerShell-Wächter mit harmlosen Testprogrammen aus."""
+
+import base64
+import json
+import os
+import shutil
+import subprocess
+import time
+from pathlib import Path
+
+import pytest
+
+from syncvito import updater
+
+pytestmark = pytest.mark.skipif(os.name != "nt", reason="Windows-Prozesslebenszyklus")
+
+
+def wait_for_file(path: Path, timeout: float = 15) -> None:
+    deadline = time.monotonic() + timeout
+    while not path.exists():
+        if time.monotonic() > deadline:
+            pytest.fail(f"Testprozess hat keine Datei geschrieben: {path}")
+        time.sleep(0.05)
+
+
+@pytest.fixture(scope="module")
+def helper_exe(tmp_path_factory: pytest.TempPathFactory) -> Path:
+    root = tmp_path_factory.mktemp("watcher-helper")
+    source = root / "helper.cs"
+    source.write_text(
+        """
+using System;
+using System.IO;
+using System.Threading;
+class Helper {
+    static int Main(string[] args) {
+        File.WriteAllLines(args[0], args);
+        var deadline = DateTime.UtcNow.AddSeconds(30);
+        while (!File.Exists(args[1])) {
+            if (DateTime.UtcNow > deadline) return 99;
+            Thread.Sleep(50);
+        }
+        return Int32.Parse(args[2]);
+    }
+}
+""",
+        encoding="utf-8",
+    )
+    compiler = Path(os.environ.get("SYSTEMROOT", r"C:\Windows")) / "Microsoft.NET/Framework64/v4.0.30319/csc.exe"
+    if not compiler.exists():
+        pytest.skip("Windows-.NET-Compiler für Testprogramm nicht vorhanden")
+    executable = root / "SyncVitoWatcherTest.exe"
+    subprocess.run(
+        [str(compiler), "/nologo", "/target:winexe", f"/out:{executable}", str(source)],
+        check=True,
+        capture_output=True,
+        timeout=30,
+    )
+    return executable
+
+
+@pytest.mark.parametrize("exit_code", [0, 5])
+def test_watcher_waits_for_all_instances_and_real_setup_exit(
+    helper_exe: Path, tmp_path: Path, monkeypatch: pytest.MonkeyPatch, exit_code: int
+) -> None:
+    root = tmp_path / "Ordner mit Leerzeichen und 'Apostroph'"
+    root.mkdir()
+    installer = root / "SetupTest.exe"
+    shutil.copy2(helper_exe, installer)
+    unrelated_dir = root / "anderer Installationspfad"
+    unrelated_dir.mkdir()
+    unrelated_exe = unrelated_dir / helper_exe.name
+    shutil.copy2(helper_exe, unrelated_exe)
+    children = []
+    releases = []
+
+    def start_client(exe: Path, name: str) -> subprocess.Popen:
+        ready = root / f"{name}.ready"
+        release = root / f"{name}.release"
+        releases.append(release)
+        process = subprocess.Popen([str(exe), str(ready), str(release), "0"])
+        children.append(process)
+        wait_for_file(ready)
+        return process
+
+    def launch_watcher(executable: str, arguments: list[str]) -> None:
+        children.append(subprocess.Popen([executable, *arguments], creationflags=subprocess.CREATE_NO_WINDOW))
+
+    try:
+        parent = start_client(helper_exe, "parent")
+        extra = start_client(helper_exe, "extra")
+        unrelated = start_client(unrelated_exe, "unrelated")
+        monkeypatch.setattr(updater, "_start_detached", launch_watcher)
+        output = root / "setup.arguments"
+        setup_release = root / "setup.release"
+        releases.append(setup_release)
+        log = root / "bootstrap.log"
+        arguments = [str(output), str(setup_release), str(exit_code), f"/DIR={root}", f"/LOG={root / 'setup.log'}"]
+        updater._start_installer_after_exit(installer, arguments, [parent.pid], log, helper_exe)
+        watcher = children[-1]
+        wait_for_file(log)
+        assert not output.exists()
+        releases[0].touch()
+        parent.wait(timeout=10)
+        time.sleep(0.5)
+        assert not output.exists(), "Weitere Instanz wurde nicht abgewartet"
+        releases[1].touch()
+        extra.wait(timeout=10)
+        wait_for_file(output)
+        assert unrelated.poll() is None, "Anderer Installationspfad darf weiterlaufen"
+        assert output.read_text(encoding="utf-8-sig").splitlines() == arguments
+        assert watcher.poll() is None, "Wächter muss auf Setup warten"
+        assert not (root / "update-result.json").exists()
+        setup_release.touch()
+        assert watcher.wait(timeout=15) == (0 if exit_code == 0 else 1)
+        receipt = json.loads((root / "update-result.json").read_text(encoding="utf-8"))
+        assert receipt["success"] is (exit_code == 0)
+        assert receipt["exit_code"] == exit_code
+        assert f"Installer-Exitcode: {exit_code}" in log.read_text(encoding="utf-8-sig")
+    finally:
+        for release in releases:
+            release.touch()
+        for child in children:
+            try:
+                child.wait(timeout=10)
+            except subprocess.TimeoutExpired:
+                child.kill()
+                child.wait(timeout=5)
+
+
+def test_watcher_reports_timeout_without_starting_installer(
+    helper_exe: Path, tmp_path: Path, monkeypatch: pytest.MonkeyPatch
+) -> None:
+    ready = tmp_path / "client.ready"
+    release = tmp_path / "client.release"
+    log = tmp_path / "bootstrap.log"
+    client = subprocess.Popen([str(helper_exe), str(ready), str(release), "0"])
+    watchers = []
+
+    def launch_with_short_deadline(executable: str, arguments: list[str]) -> None:
+        script = base64.b64decode(arguments[-1]).decode("utf-16-le")
+        script = script.replace("AddMinutes(2)", "AddMilliseconds(400)")
+        arguments[-1] = base64.b64encode(script.encode("utf-16-le")).decode("ascii")
+        watchers.append(subprocess.Popen([executable, *arguments], creationflags=subprocess.CREATE_NO_WINDOW))
+
+    try:
+        wait_for_file(ready)
+        monkeypatch.setattr(updater, "_start_detached", launch_with_short_deadline)
+        updater._start_installer_after_exit(tmp_path / "not-started.exe", ["/VERYSILENT"], [], log, helper_exe)
+        assert watchers[0].wait(timeout=15) == 1
+        receipt = json.loads((tmp_path / "update-result.json").read_text(encoding="utf-8"))
+        assert not receipt["success"]
+        assert str(client.pid) in receipt["message"]
+        assert "Beenden" in receipt["message"]
+        assert "Starte verifizierten Installer" not in log.read_text(encoding="utf-8-sig")
+        assert client.poll() is None
+    finally:
+        release.touch()
+        client.wait(timeout=10)
+        for watcher in watchers:
+            watcher.wait(timeout=10)

tests/test_updater.py

@@ -1,5 +1,6 @@
 import base64
 import hashlib
+import json
 import os
 from pathlib import Path
 
@@ -154,12 +155,37 @@ def test_update_watcher_waits_before_installer(monkeypatch: pytest.MonkeyPatch,
     powershell = Path(os.environ.get("SYSTEMROOT", r"C:\Windows")) / "System32/WindowsPowerShell/v1.0/powershell.exe"
     monkeypatch.setattr(Path, "is_file", lambda self: self == powershell)
 
-    updater._start_installer_after_exit(installer, ["/VERYSILENT"], [222, 111], bootstrap_log)
+    updater._start_installer_after_exit(
+        installer, ["/VERYSILENT"], [222, 111], bootstrap_log, tmp_path / "SyncVito.exe"
+    )
 
     arguments = captured["arguments"]
     assert isinstance(arguments, list)
     encoded = arguments[arguments.index("-EncodedCommand") + 1]
     script = base64.b64decode(encoded).decode("utf-16-le")
     assert "foreach ($processId in @(111, 222))" in script
-    assert script.index("while (Get-Process") < script.index(str(installer))
+    assert script.index("while ($true)") < script.index(str(installer))
+    reset_environment = "$env:PYINSTALLER_RESET_ENVIRONMENT = '1'"
+    assert reset_environment in script
+    assert script.index(reset_environment) < script.index("$setup = Start-Process")
     assert "'/VERYSILENT'" in script
+
+
+@pytest.mark.parametrize("success", [False, True])
+def test_installer_result_is_consumed_but_logs_are_kept(tmp_path: Path, success: bool) -> None:
+    service = GiteaUpdateService("1.0.7", update_directory=tmp_path)
+    receipt = tmp_path / "update-result.json"
+    receipt.write_text(json.dumps({"success": success, "message": "Installation abgebrochen"}), encoding="utf-8")
+    log = tmp_path / "SyncVitoSetup-1.0.8.log"
+    log.write_text("Diagnose")
+    assert service.take_install_error() == (None if success else "Installation abgebrochen")
+    assert service.take_install_error() is None
+    assert log.read_text() == "Diagnose"
+
+
+def test_incomplete_installer_result_can_be_read_later(tmp_path: Path) -> None:
+    service = GiteaUpdateService("1.0.7", update_directory=tmp_path)
+    receipt = tmp_path / "update-result.json"
+    receipt.write_text('{"success":', encoding="utf-8")
+    assert service.take_install_error() is None
+    assert receipt.exists()

version.txt

@@ -1 +1 @@
-1.0.2
+1.0.10